The Brushless Motor Industrial Application, “AE-BMI”, is designed to perform the most common control used in the industry: the position control. The “AE-BMI” application allows the student to configure up to four positions with all the parameters involved when the system has to reach each of these positions: relative or absolute positioning, speed value, acceleration and deceleration of the system when it approaches the desired position, digital input signal to activate every position, setting the home position, etc.
SPECIFICATION
The elements included in the “BMI-UB” unit:
- N-ALI02. Domestic Main Power Supply Module.
Supply voltage (single-phase): 230 VAC, 1PH + N.
ON/OFF removable key.
Output voltage connections
Two single-phase: 230 VAC.
Single-phase supply hose with connecting plug.
Differential magnetothermal 2 poles, 25 A, 30 mA AC 6 KA.
Emergency stop push button.
- N-BMI-DRV. Brushless Motor Driver.
Supply voltage (single-phase): 220 VAC.
Output power: 100 W.
USB connector to PC.
Position control through pulse width modulated signal (PWM).
Encoder with a resolution of 288 pulses per revolution.
Digital signals:
Six digital inputs
Two digital outputs
Brushless motor control
Reset button for the driver
- N-MD-MT. Motor Driver Test Module.
Supply voltage (single-phase): 220 VAC.
Twenty digital signal generators:
Ten switches.
Ten push buttons.
Each output has a green LED.
Output voltage levels of 0 VDC and 24 VDC.
Two pulse signal generator:
Two encoder to generate a pulsed signal.
Two analog signal generators:
Two potentiometers.
Output voltage range from 0 V to + 5 V. 2 A fuse.
