The “SERIN/CC” trainer consists on a Control Interface Box and a Direct Current Motor and Encoder Module.
SPECIFICATION
- SERIN/CC. Unit
Control Interface Box
Seven digital outputs
Thirteen digital inputs
Seven user definable digital inputs for process control
Digital input (trigger signal)
Three digital inputs: reference, left limit and right limit
Two digital inputs power stage and stop
Two analog inputs with voltages in the range of 0 – 5 V.
Two potentiometers to select the value of the analog inputs (0 – 5 V DC)
Ignition Switch. When the unit is on, the red LED is active and lighting.
Back panel:
Voltage supply. There is a voltage supply that feeds the unit with 220 V of alternating current.
Motor power supply. It is a 24 V DC motor power supply
Connection port in series.
Connection with the Feedback.
Direct Current Motor and Encoder Module:
DC Motor, 90W.
Digital encoder, 500 pulses per revolution, with RS232 communication port.
Two power supply wires.
Two communication RS232 wires.
- ERIN/CC/CCSOF. Computer Control + Data Acquisition + Data Management Software
- Cables and Accessories
- Manuals
