The 1 kW AC Industrial Servomotor Application, “AEL-SERIN/CA-1KW”, has been designed to study the working principle and control of industrial servomotors.
The “AEL-SERIN/CA-1KW” allows the user to acquire knowlegde and experience in the control of the mechanical parameters of a servomotor. For this purpose, the application includes a servomotor along with its control module and two digital meters to monitor speed and torque values throughout the whole process.
In addition, once this knowledge has been acquired the user will be able, if desired, to carry out manual tests for rotating electrical machines with the goal of setting different operating conditions to obtain its characteristic curves and parameters.
In order to carry out advanced electrodynamic tests for rotating electrical machines, it is recommended to acquire the Control and Data Acquisition System Software for Electrical Machines, “EM-SCADA”. This advanced software allows monitoring waveforms for voltage, current, torque and speed for the in-depth study of the electrical machines to be tested.
SPECIFICATION
The “AEL-SERIN/CA-1KW” application includes the following elements:
• N-SERV1K. 1 kW Servomotor Module.
Dynamic and static operating regime in four quadrants.
Speed and torque signals.
Power supply terminals: 3 x 400 VAC.
Frequency: 50/60 Hz.
Nominal power: 1 kW.
Maximum power: 3 kW.
Maximum speed: 5000 rpm.
Nominal torque: 3.18 Nm.
Maximum torque: 9.55 Nm.
• N-ALI01. Industrial Main Power Supply Module.
Supply voltage: 400 VAC, 3PH + N.
ON/OFF removable key.
Output voltage connections:
Three-phase + Neutral: 400 VAC.
Single-phase: 230 VAC.
Three-phase supply hose with IP44 3PN + E 32 A 400 V connecting plug.
Differential magnetothermal 4 poles, 25 A, 30 mA AC 6 KA.
• N-DMC01. Torque and Speed Measurement Module 1.
Digital torque meter:
Torque signal connector.
Auxiliary contact NO.
Digital speed meter:
Speed signal connector.
Auxiliary contact NO.
IP66 protection.
