The “AEL-EPP” application includes a control and data acquisition software, SCADA, which will allow the user to remotely control the power system. The SCADA software allows performing the most significant operations carried out in real power systems, such as turbine and generator speed and voltage control, generator coupling maneuvers with the grid (synchronization), isolated operations with the synchronous generator, voltage and current measurements at different points of the power system, visualization of power curves, etc.
SPECIFICATION
The “AEL-EPP” application includes the following elements:
- N-ALI01. Industrial Main Power Supply Module.
Supply voltage: 400 VAC, 3PH + N.
Output voltage connections: Three-phase + Neutral: 400 VAC. Single-phase: 230 VAC.
Three-phase supply hose with IP44 3PN + E 32 A 400 V connecting plug.
- N-PSUB2. Power Generation Substation Module 2
Supply voltage: 400 VAC, 3PH + N.
Three-phase turbine supply hose with IP44 3PN+E 32 A 400 V connecting plug.
Three-phase generator supply hose with IP44 3PN+E 32 A 400 V connecting plug
Three switches to choose between the different modes:
Three control switches
Two potentiometers to regulate
- EMT6/1K. 1kW/1P Three-Phase Synchronous Generator
Nominal power: 1000 VA.
Power factor: 0.8.
Nominal output voltage: 3 x 400 VAC.
Frequency: 50/60 Hz.
Speed: 3000 rpm.
Nominal output current: 0.8 A.
Nominal excitation current: 5 A.
- SERV01. AC Servomotor 1
Nominal power: 2000 W.
Nominal voltage: 400 VAC.
Nominal speed: 3000 rpm.
Nominal current: 5 A.
- N-EALD. Network Analyzer Module with Oscilloscope and Data Acquisition.
