SPECIFICATIONS
• N-KNX34. KNX/EIB USB Programming Interface Module.
Power supply: KNX line, 21…30 VDC.
Current consumption (max.): < 5 mA.
USB connection: USB2.0 connector.
• N-KNX18. KNX/EIB Power Supply Module.
Power supply: 230 VAC.
Maximum load: 640 mA.
Output voltage: 24 VDC.
• N-KNX9. KNX/EIB Electronic Control Module.
Nominal voltage: 230 VAC.
Frequency: 50 Hz.
KNX bus voltage: 24 VDC.
Mains inputs/outputs: 4 mm safety sockets.
Bus inputs/outputs: 2 mm safety sockets.
Automatic control.
• N-KNX8. KNX/EIB Dimming Actuator Module.
Nominal voltage: 230 VAC.
Frequency: 50 Hz.
KNX bus voltage: 24 VDC.
Bus inputs/outputs: 2 mm safety sockets.
Mains inputs/outputs: 4 mm safety sockets.
• N-KNX10. KNX/EIB Energy Meter Module.
KNX bus voltage: 24 VDC.
Bus inputs/outputs: 2mm safety sockets.
This module allows measure:
Active power.
Active energies.
Current.
Voltage.
• N-KNX21. KNX/EIB Room Controller Module.
KNX bus voltage: 24 VDC.
Bus inputs/outputs: 2 mm safety sockets.
• N-KNX2. KNX/EIB Additional Power Supply Module.
KNX bus voltage: 28 VDC.
Bus inputs/outputs: 2 mm safety sockets.
• N-KNX4. KNX/EIB Binary Input Module.
Nominal voltage: 230 VAC.
Frequency: 50 Hz.
KNX bus voltage: 24 VDC.
Mains inputs/outputs: 4 mm safety sockets.
Bus inputs/outputs: 2 mm safety sockets.
• N-KNX5. KNX/EIB Binary Output Module.
Nominal voltage: 230 VAC.
Frequency: 50 Hz.
KNX bus voltage: 24 VDC.
Mains inputs/outputs: 4 mm safety sockets.
Bus inputs/outputs: 2 mm safety sockets.
• N-KNX30. KNX/EIB Touch Panel Module.
Nominal voltage: 230 VAC.
Frequency: 50 Hz.
KNX bus voltage: 24 VDC.
Mains inputs/outputs: 4 mm safety sockets.
Bus inputs/outputs: 2 mm safety sockets.
• N-KNX25. KNX/EIB Single Line Extending Bus Module.
Nominal voltage: 230 VAC.
Frequency: 50 Hz.
KNX bus voltage: 24 VDC.
Mains inputs/outputs: 4 mm safety sockets.
Bus inputs/outputs: 2 mm safety sockets.
Interconnection with other KNX/EIB systems.
• N-KNX29. KNX/EIB Temperature Sensor Module.
KNX bus voltage: 24 VDC.
Bus inputs/outputs: 2 mm safety sockets.
Range measurement: 0 – 40 ºC (approx.).
• N-KNX17. KNX/EIB Movement Sensor Module.
Movement sensor for bus system KNX.
Max. Transmission range frontally 7 m.
Number of channels 1.
• N-KNX14. KNX/EIB Light Sensor Module.
KNX bus voltage: 24 VDC.
Bus inputs/outputs: 2 mm safety sockets.
Photosensitive cell.
• N-KNX28. KNX/EIB Switch Actuator Module.
Nominal voltage: 230 VAC.
Frequency: 50 Hz.
KNX bus voltage: 24 VDC.
Bus inputs/outputs: 2 mm safety sockets.
Mains inputs/outputs: 4 mm safety sockets.
• N-LAM08. 2 Lamps-holders + Incandescent Lamps 40 W.
Nominal voltage: 230 VAC.
Nominal Power: 2 x 40 W.
Mains inputs/outputs: 4 mm safety sockets.
• N-LAM32. 1 Led Lamp.
Nominal voltage: 230 VAC.
Nominal Power: 4 W.
• All necessary cables to realize the practical exercises are included.
Cables and Accessories, for normal operation.
AEL-KNX5 | KNX/EIB ENERGY MANAGEMENT APPLICATION
AEL-KNX5 KNX/EIB ENERGY MANAGEMENT APPLICATION
The KNX/EIB Energy Management Application, “AEL-KNX5”, has been designed by Edibon to show the students the most important KNXelements used in the most advanced energy management systems.
The purpose of the AEL-KNX5 is to give the students a complete practical and theoretical training in the installations and programming ofthe most important KNX elements focused in the efficient usage of the resources, the optimization of the control of different parameters, etc.
To take a maximum experience with the KNX/EIB Energy Management Application is very recommendable to acquire the rest of the KNXoffered by Edibon, AEL-KNX1, AEL-KNX2, AEL-KNX3 and AEL-KNX4. The combination of all these applications allows the student to designa complete intelligent bus system implemented by a KNX System.
